Short answer
Apple lists these errors as possible hardware issues — but not definite ones. Before assuming the iPhone is broken, restart the computer's software, turn off security software, use a reliable cable and network, and try the restore again. If the same error repeats on another computer, the iPhone likely needs a repair.
What you see
The iPhone [name] could not be restored. An unknown error occurred (1).
| Error codes | 1 3 11 12 16 20 21 23 26 27 28 29 34 35 36 37 40 56 1002 1004 1011 1012 1014 1667 1669 |
| Where the problem is | Possibly hardware — Apple lists these as possible hardware faults. |
| Will the fix erase my iPhone? | Only if a restore is needed; try Update first |
| Apple's article | iOS update and restore errors |
What these errors mean
Apple groups errors 1, 3, 11, 12, 13, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40 and 56, and 1002, 1004, 1011, 1012, 1014, 1667 and 1669, under one heading: you might have a hardware issue.
"Might" matters. The same numbers can come from a restore that was interrupted or blocked, so the software side has to be ruled out before a repair makes sense.
Rule out the software first
- Quit and reopen the Apple Devices app or iTunes if it is open; on a Mac, close the Finder window and reconnect.
- Check security software on the computer — turn it off for the restore.
- Use a reliable cable, port and network. An Apple cable, a port on the computer itself, a network without a proxy.
- Restore again. A second attempt succeeds more often than you would expect.
- Check for outdated or modified software. A jailbroken iPhone, or an attempt to install an older version, can fail with these numbers — the error 1015 page covers both.
The decisive test: another computer
Restore on a different computer, on a different network, with a different Apple cable. If the restore succeeds, the original computer or connection was the problem. If the same error number returns, the cause is very likely inside the iPhone.
A DFU restore is the deepest software restore available and worth one attempt before giving up.
When it is hardware
An error that survives a second computer and a DFU restore points at a component — commonly the storage, the logic board or the connector. An iPhone that was dropped or got wet before the errors began makes that more likely. Apple or an authorised repair provider can test it; a repair, not another restore, is the fix.
If the iPhone still starts normally between attempts, back it up first — to iCloud needs no cable.
Frequently Asked Questions
What does error 1 mean on iPhone?
Apple lists it as a possible hardware issue. Rule out the computer, cable, network and security software first; if it repeats on another computer, the iPhone likely needs a repair.
Is error 21 or error 56 always hardware?
No. Apple says these errors might be hardware. A clean restore on a different computer is the test that tells you.
Can a DFU restore fix a hardware error?
It fixes software that recovery mode cannot reach. If the error remains after a DFU restore on another computer, the fault is in the device.
Written from Apple's support article iOS update and restore errors and our own restore guides. Last reviewed November 15, 2026. Also covers errors 3, 11, 12, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 56, 1002, 1004, 1011, 1012, 1014, 1667, 1669.